Brazil Site   French Site   German Site   EU Site   Russian Site   Other Global Sites
Contact Us | info@magnetrol.com
 
  
Resources

Literature

Displacer Switch Technology
 
Operating Principle

Displacer switch operation is based upon simple buoyancy, whereby a spring is loaded with weighted displacers, which are heavier than the liquid. Immersion of the displacers in the liquid results in buoyancy force change, changing the net force acting on the spring. The spring compresses as the buoyancy force increases.

A magnetic sleeve is connected to the spring and operates within a non-magnetic barrier tube. Spring movement causes the magnetic sleeve to move into the field of a pivoted magnet, actuating a switch mechanism located outside the barrier tube. Built-in limit stops prevent over stroking of the spring, under level surge conditions.

PROOF-ER® DISPLACER SWITCH LIQUID LEVEL MEASUREMENT BASICS

The purpose of the PROOF-ER is to check the operation of a displacer control without having to raise the level in the tank. This is accomplished by pulling downward on the PROOF-ER cable. This action causes the spring-loaded lever arm to lift the displacer switch actuator, simulating a high or high/high level condition. When the cable is released, the PROOF-ER returns the actuator to its previous position to resume normal operation.

 




Recently viewed products
You have no recently viewed items.
After viewing product detail pages or search results, look here to find an easy way to navigate back to pages you are interested in.